Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 8xD Long Series

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision)

Sizes ranging from 3mm- 14mm

Europa Tool

848303

Micrograin Carbide Substrate
ALU-Dream Drill for Ultra High Performance Drilling
Ideal for Drilling Aluminium, Non-Ferrous Alloys & Copper
Ultra High Feed Rates & Excellent Chip Control
Exceptional Surface Finish Due to Sharp Drill Point & Lapped Flutes
8xD Long Length
Reaming Not Required
Through Coolant
Self Centering with 118 degree Drill Point

Sort by

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.0mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.1mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.2mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.3mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.4mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.5mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.6mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.7mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.8mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

3.9mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.0mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.1mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.2mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.3mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.4mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.5mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.6mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.7mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.8mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

4.9mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.0mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.1mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.2mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.3mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.4mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.5mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.6mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.7mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.8mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

5.9mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.0mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.1mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.2mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.3mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.4mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.5mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.6mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.7mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.8mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

Uncoated Carbide Through Coolant Drill - For Alu ( High Precision) 10.0mm - Precision Engineering Tools EW Equipment

6.9mm Carbide Uncoated Through Coolant Drill 8xD Long Series- For Alu ( High Precision)

←
1
2
→