EMUGE BasicDrill

The EMUGE twist drill programme is being expanded with the new BASIC product line, which is designed for universal use, with steel materials being the focus of the tool design. The price and performance requirements of customers who machine a variety of different materials with the same tool determined the product development. The carbide grade, the coating and the shape of the cutting edge were optimised for universal use. For example, the curved cutting edge produces very short chips and shapes the chip so that it can be easily removed from the hole through the specially shaped groove. A particularly robust cutting edge ensures precise drilling and a long tool life.

- Cutting edge shape and edge preparation: The concave main cutting edge combined with an optimised
edge preparation enables the best cutting behaviour in the
steel and cast iron area with excellent tool life.

- Cutting material and coating: The combination of carbide and a high-performance coating
enables higher cutting speeds and feed rates

- Point Geometry: An optimised point design allows sufficient space for
chip forming and coolant distribution.

- Margins: The design with four margins ensures optimum guidance of
the twist drill in the bore. The third and fourth margin are
arranged in such a way that they engage at an early stage.
The special design prevents jamming even in stainless
steel materials.

- Shank end: The shank end has been designed in such a way that the
drilling tool can be used with emulsion as well as with
minimum quantity lubrication (MQL).

- Flutes: The open shape pf the flute facilitates smooth chip evacuation.

Emuge - 3 x D BasicDrills - Solid Carbide

Ranges from 3mm - 18mm

- With internal coolant supply

- TiALN Coated

- Straight Shank DIN 6535 HA

- 140° Point Angle

- Achievable tolerance of drilled hole IT9-IT10

Emuge - 5 x D BasicDrills - Solid Carbide

Ranges from 3mm - 18mm

- With internal coolant supply

- TiALN Coated

- Straight Shank DIN 6535 HA

- 140° Point Angle

- Achievable tolerance of drilled hole IT9-IT10

Emuge - Micro MULTI Drills - Solid Carbide

Ranges from 1.6mm - 2.5mm

- TiALN Coated

- Straight Shank DIN 6535 HA

- 118° Point Angle

 

Emuge - 3 x D MULTI Drills - Solid Carbide

Ranges from 2.8mm - 24.5mm

- TiALN Coated

- Straight Shank DIN 6535 HA

- 140° Point Angle

- Achievable tolerance of drilled hole IT9-IT10

Emuge - 5 x D MULTI Drills - Solid Carbide

Ranges from 2.8mm - 24.5mm

- With internal coolant supply

- TiALN Coated

- Straight Shank DIN 6535 HA

- 140° Point Angle

- Achievable tolerance of drilled hole IT9-IT10