The most versatile inserts offered, VGD (double sided) inserts are available in pocket sizes (width) 2.0 - 6.0mm, in right hand, left hand, and neutral.
The VGS (single sided) inserts are available in pocket sizes (width) 2.0 - 4.0mm, in right hand, left hand, and neutral.
The GT insert is a positive rake chip former with multifunctional chip control and low cutting forces during cutting, ideal for any turning operation. The GT double sided insert is available in pocket sizes (width) 2.0 - 6.0mm.
The GR insert has a round shape geometric design for profiling. It is a positive rake chip former with multifunctional control for undercut and face turning. The GR double sided insert is available in pocket sizes (width) 2.0 - 6.0mm.
The Threading inserts have a varied range of threading standards for machining between shoulders and close to spindle in up to shoulder depth of 10.0mm. The double sided insert is 3.00mm wide and is available in VPG grade. Current threading standards available are ISO Metric, American UN, NPT & Whitworth.
60° and 55° external profiles.
60° and 55° external profiles.
VG-Cut
VGD-GT Inserts for General Use.
( Double Sided )
VG-Cut
VGD-GP Blunt reinforced cutting edge for high feed & speed
( Double Sided )
VG-Cut
VGD-GM Positive sharp cutting edge, for low feed & speed
( Double Sided )
VG-Cut
VGD-GR Round shape geometric design for profiling. Positive rake chip former and multifunctional chip control for undercut and profiling
( Double Sided )
VG-Cut
VGS-GM Positive sharp cutting edge, for low feed & speed
( Single Sided )
VG-Cut
VGS-GP Blunt reinforced cutting edge for high feed & speed
( Single Sided )